I installed the 3.0.16-2 today and hoped that it now works properly.
Unfortunately it does not.
For example, when I play an MP4 I can fast forward and rewind but it does not take long then it freezes the entire system.
This problem I have only after the 3.0.6 or 3.0.8. Before it ran fine.
My System is:
Code: Select all
inxi -Fxxxzo
System:
Kernel: 5.10.49-1-MANJARO x86_64 bits: 64 compiler: gcc v: 11.1.0
Desktop: Xfce 4.16.0 tk: Gtk 3.24.29 info: xfce4-panel wm: xfwm 4.16.1
vt: 7 dm: LightDM 1.30.0 Distro: Manjaro Linux base: Arch Linux
Machine:
Type: Desktop System: Dell product: OptiPlex 360 v: N/A serial: <filter>
Chassis: type: 6 serial: <filter>
Mobo: Dell model: 0T656F v: A01 serial: <filter> BIOS: Dell v: A07
date: 06/18/2012
CPU:
Info: Dual Core model: Pentium E5200 bits: 64 type: MCP arch: Penryn
rev: 6 cache: L2: 2 MiB
flags: lm nx pae sse sse2 sse3 ssse3 bogomips: 9976
Speed: 1417 MHz min/max: N/A Core speeds (MHz): 1: 1417 2: 2420
Graphics:
Device-1: NVIDIA GT218 [GeForce 210] driver: nouveau v: kernel
bus-ID: 01:00.0 chip-ID: 10de:0a65 class-ID: 0300
Device-2: Microsoft LifeCam HD-5000 type: USB
driver: snd-usb-audio,uvcvideo bus-ID: 2-1:2 chip-ID: 045e:076d
class-ID: 0102
Display: x11 server: X.Org 1.20.11 compositor: xfwm4 v: 4.16.1 driver:
loaded: nouveau unloaded: modesetting alternate: fbdev,nv,vesa
resolution: 1680x1050~60Hz s-dpi: 96
OpenGL: renderer: NVA8 v: 3.3 Mesa 21.1.4 direct render: Yes
Audio:
Device-1: Intel NM10/ICH7 Family High Definition Audio vendor: Dell
driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:27d8
class-ID: 0403
Device-2: NVIDIA High Definition Audio driver: snd_hda_intel v: kernel
bus-ID: 01:00.1 chip-ID: 10de:0be3 class-ID: 0403
Device-3: Microsoft LifeCam HD-5000 type: USB
driver: snd-usb-audio,uvcvideo bus-ID: 2-1:2 chip-ID: 045e:076d
class-ID: 0102
Sound Server-1: ALSA v: k5.10.49-1-MANJARO running: yes
Sound Server-2: JACK v: 0.125.0 running: no
Sound Server-3: PulseAudio v: 14.2 running: no
Sound Server-4: PipeWire v: 0.3.31 running: yes
Network:
Device-1: Broadcom NetLink BCM5784M Gigabit Ethernet PCIe vendor: Dell
driver: tg3 v: kernel port: dc80 bus-ID: 02:00.0 chip-ID: 14e4:1698
class-ID: 0200
IF: enp2s0 state: down mac: <filter>
Device-2: Realtek RTL-8100/8101L/8139 PCI Fast Ethernet Adapter
driver: 8139too v: 0.9.28 port: cc00 bus-ID: 03:00.0 chip-ID: 10ec:8139
class-ID: 0200
IF: enp3s0 state: unknown speed: 100 Mbps duplex: full mac: <filter>
Drives:
Local Storage: total: 931.51 GiB used: 525.91 GiB (56.5%)
ID-1: /dev/sda vendor: Samsung model: SSD 860 QVO 1TB size: 931.51 GiB
speed: <unknown> rotation: SSD serial: <filter> rev: 2B6Q scheme: GPT
Partition:
ID-1: / size: 105.18 GiB used: 56.21 GiB (53.4%) fs: ext4 dev: /dev/sda2
ID-2: /boot size: 973.4 MiB used: 149 MiB (15.3%) fs: ext4 dev: /dev/sda1
ID-3: /home size: 779.45 GiB used: 469 GiB (60.2%) fs: ext4 dev: /dev/sda3
Swap:
ID-1: swap-1 type: partition size: 30.12 GiB used: 572.8 MiB (1.9%)
priority: -2 dev: /dev/sda4
Unmounted:
Message: No unmounted partitions found.
Sensors:
System Temperatures: cpu: 51.0 C mobo: N/A gpu: nouveau temp: 47.0 C
Fan Speeds (RPM): N/A
Info:
Processes: 170 Uptime: 14h 29m wakeups: 0 Memory: 3.77 GiB
used: 2.71 GiB (71.9%) Init: systemd v: 248 Compilers: gcc: 11.1.0
clang: 12.0.1 Packages: note: see --pkg pacman: 1832 Shell: Bash v: 5.1.8
running-in: xfce4-terminal inxi: 3.3.05 Who can help me or at least tell me when the 3.0 will run smoothly again? Or will it only work again with the 4.0 (whenever that may come).
Yours sincerely, R.Lehmeier
