The VideoLAN Forums

Dear all,
I configure and compile the VLC082 as the following:
make distclean ; ./configure --prefix=/asbwork/vlc0822 --enable-x11 --enable-xvideo --disable-sdl --enable-wxwindows --enable-ffmpeg --disable-mad --enable-libdvbpsi --enable-libmpeg2 --enable-alsa --disable-kde --disable-qt --enable-livedotcom --with-livedotcom-tree=/asbwork/vlc0822/downlib/live --with-ffmpeg-tree=/asbwork/vlc0822/downlib/ffmpeg094 --with-libmpeg2-tree=/asbwork/vlc0822/downlib/mpeg2dec040 --with-wx-config-path=usr/local/bin/wx-config

When I play one H.264 film, the video is ok, but there is no sound. There are some errors shown as the following:

libdvbpsi debug (PAT decoder): Table version 0, i_extension 4369, section 0 up to 0, current 1
libdvbpsi debug (PMT decoder): Table version 0, i_extension 10, section 0 up to 0, current 1
[00000279] main audio output error: couldn't find a filter for the conversion
[00000279] main audio output error: couldn't set an input pipeline
libdvbpsi debug (PAT decoder): Table version 0, i_extension 4369, section 0 up to 0, current 1
libdvbpsi debug (PMT decoder): Table version 0, i_extension 10, section 0 up to 0, current 1
libdvbpsi debug (PAT decoder): Table version 0, i_extension 4369, section 0 up to 0, current 1
libdvbpsi debug (PMT decoder): Table version 0, i_extension 10, section 0 up to 0, current 1
libdvbpsi debug (PAT decoder): Table version 0, i_extension 4369, section 0 up to 0, current 1
libdvbpsi debug (PMT decoder): Table version 0, i_extension 10, section 0 up to 0, current 1
libdvbpsi debug (PAT decoder): Table version 0, i_extension 4369, section 0 up to 0, current 1
libdvbpsi debug (PMT decoder): Table version 0, i_extension 10, section 0 up to 0, current 1
libdvbpsi debug (PAT decoder): Table version 0, i_extension 4369, section 0 up to 0, current 1
libdvbpsi debug (PMT decoder): Table version 0, i_extension 10, section 0 up to 0, current 1

Hope to get the suggestions from you. Thanks a lot.

Some of the video codecs the sound is not supported if you will use the -vvv option when you run the program, it will give ou more debug info. So type this on the command line before running the video.
./vlc -vvv