budget cards don't work if voltage=0 ?

[Fox-xxxx]

3 cards, 1 splitter, vlc, linux 2.6.21.1

1 card set voltage=13 result work
2,3 set voltage=0 result don't work

if 1,2,3 cards set voltage=13 result don't work (vlc always restart after
1-3 seconds and says that can't tune)
change 4 differents splitters same result

looks like don't switch on tuner or something else if voltage=0 !
but if all cards use voltage why vlc always restart ?

[Teetrinker]

With a dvb-voltage about 13V(vertical) and about 18V(horizontal) you tell the LNB which polarization to use.

If the voltage at the coaxial cable, which reach the LNB, is beyond the operating range, the LNB won't work propper.
How does your splitter work, was he designed for this task?
Does it work if you use 3 standalone DVB-S receiver with your splitter?

[Fox-xxxx]

With a dvb-voltage about 13V(vertical) and about 18V(horizontal) you tell the LNB which polarization to use.

If the voltage at the coaxial cable, which reach the LNB, is beyond the operating range, the LNB won't work propper.


How does your splitter work, was he designed for this task?

Does it work if you use 3 standalone DVB-S receiver with your splitter?

1. i said that i use voltage 13
2. sure YES
i try
http://belkatv.ru/viewImg.php?img_id=61 ... name=Goods
http://belkatv.ru/viewImg.php?img_id=82 ... name=Goods
3. standalone DVB-S receiver (THINK yes becouse i try home standalone DVB-S receiver on 4 out of splitter and it works with voltage 0 or voltage 13)


so i try other things
test 1
4 cards, 1 splitter, vlc, os linux 2.6.21.1

1 card set vlotage=13 result work
2,3,4 set voltage=0 result don't work

if 1,2,3,4 cards set voltage=13 result don't work (vlc always restart after
1-3 seconds and says that can't tune)
change differents splitters same result

i stand 1 dvb card to other pc result same!

[Fox-xxxx]

test 2

use splitter 1 in 2 out all port power pass

1 port to splitter on 4 out (all cards in splitter 4 out set voltage 0)
2 port use tuner for lnb power

result tuner work, all cards doesn't work