RTSP with Amino problem

Discussion about configuration and usage of VLM (a stream scheduler) within VLC.
evoss
New Cone
New Cone
Posts: 2
Joined: 18 Jul 2006 18:08
Location: argentina

RTSP with Amino problem

Postby evoss » 18 Jul 2006 21:02

i'm using an vlc(0.8.5) server with telnet and rtsp. I execute it like this:
vlc -I telnet --rtsp-host 0.0.0.0:554
With the telnet y make the VLM file
rob3
type: vod
enabled: yes
loop: no
mux: tx
inputs: /root/Irobot.mpg

So when my Amino send the rtsp command to play rob3 the server recognizes sends an Ok and start playing the movie. The UDP destination is OK but the port isn't. The server tells me that i cannot use same video and audio port numbers. How can i make the vlc to take the correct port. With etherreal i can see the vlc is sending TCP packet to the amino address but to port 1234!!! and the amino wants the packet in port 11111.
Thanks.
eugenio :(

robc
Blank Cone
Blank Cone
Posts: 53
Joined: 22 Dec 2005 22:04
Location: Melbourne, Australia
Contact:

Postby robc » 19 Jul 2006 06:05

Have you got an Ethereal trace that I could look at?

Gujs
Blank Cone
Blank Cone
Posts: 74
Joined: 22 Oct 2004 19:28

Postby Gujs » 19 Jul 2006 08:53

Off topic!

Hello, robc.

Do you know if in the latest svn work fast forward and rewind with aminet! I can't get it to work!

Best Regards

robc
Blank Cone
Blank Cone
Posts: 53
Joined: 22 Dec 2005 22:04
Location: Melbourne, Australia
Contact:

Postby robc » 19 Jul 2006 09:34

Do you know if in the latest svn work fast forward and rewind with aminet! I can't get it to work!
Fast-forward and rewind does not work for Amino set-top boxes at present with VLC VOD.

evoss
New Cone
New Cone
Posts: 2
Joined: 18 Jul 2006 18:08
Location: argentina

Ethereal archive

Postby evoss » 19 Jul 2006 16:55

Hi Robc, yes i got an ethereal for you.
First of all i set up the telnet server like this:
new rob3 vod enabled
setup rob3 input /root/Irobot.mpg
setup rob3 mux ts
The amino 110 is set like this (chnls.txt):
05: rtsp://221.221.221.95:554//221.221.221.95:554/rob3
So when i press in the ir remote channel 5 the amino starts the communication with the server. I send twice the ip because if not the amino doesn't send the SETUP command correctly(don't know why). The ethereal looks like this(I don't know how to upload an archive here so i copy it. Sorry.)
AMINO (RTSP layer):
Request: SETUP rtsp://221.221.221.95:554/rob3 RTSP/1.0
CSeq:1
Transport: MP2T/H2221/UDP;unicast;destination=221.221.221.229;client_port=11111
range: npt=0.000-
x-mayNotify:
x-playNow:

SERVER (RTSP layer):
Response: RTSP/1.0 200 OK
Transport: MP2T/H2221/UDP;client_port=11111-11112
Server: VLC Server
Content-Length: 0
Cseq: 1
Cache-Control: no-cache
Session: 2135957649;timeout=5

As you can see the Amino is asking the server to send packets to port 11111 and the server agree, but then the server is sending the UDP packets to 221.221.221.229:1234
Do you know why? How can i make the vlc use the port 11111. With VLC clients is working fine but i cannot make it work with the amino. Do i have to setup something else in the amino?.
thanks.

Ko&

Postby Ko& » 30 Jul 2006 15:51

Same problem here. Somebody already have a solution?

ottos
Blank Cone
Blank Cone
Posts: 14
Joined: 21 Sep 2006 17:57

Postby ottos » 07 Nov 2006 16:20

Anyone knows this problem between VLC and Amino 110 with ports 11111 and 1234 is solved or not ?

arturo130304
New Cone
New Cone
Posts: 1
Joined: 30 May 2008 16:32

Re: RTSP with Amino problem

Postby arturo130304 » 09 Jun 2008 14:58

install vlc 0.9 is in mode testing now but resolve this problem, http://nightlies.videolan.org/

arthur


Return to “VLM”

Who is online

Users browsing this forum: No registered users and 8 guests