scene-prefix not working with VLM anymore?
Posted: 20 Oct 2015 13:09
Hello,
i am using scene vfilter to generate thumbnails of many live stream inputs with VLM.
This was/is working fine with VLC version 1.1.13, but it doesn't work with vlc 2.1.6 and above up to current version 2.2.1.
Here's my vlm config (shortened to one service only):
Startup of the VLM instance with a telnet interface:
Logged into VLM's telnet interface, "show" command displays:
The problem is, that scene-prefix is ignored and thumbnails created in /tmp/ are named just "scene.png".
As said above, with old 1.1.3 vlc version, this works just fine and the thumbnail filename is "/tmp/testchannel.png".
If i use --scene-prefix=testchannel on the command line, when starting vlc 2.1.6 and above, the filename is correct.
Please help.
Thank you.
i am using scene vfilter to generate thumbnails of many live stream inputs with VLM.
This was/is working fine with VLC version 1.1.13, but it doesn't work with vlc 2.1.6 and above up to current version 2.2.1.
Here's my vlm config (shortened to one service only):
Code: Select all
del all
new test broadcast enabled loop
setup test input udp://@239.255.2.100:10001
setup test option scene-format=png
setup test option scene-ratio=5
setup test option scene-width=80
setup test option scene-height=45
setup test option scene-prefix=testchannel
control test play
Code: Select all
$ cvlc -v -I dummy --extraintf luatelnet --telnet-password asdasd -V dummy -A dummy --video-filter scene --scene-replace --scene-path=/tmp --vlm-conf ./channels.confCode: Select all
show
media : ( 1 broadcast - 0 vod )
test
type : broadcast
enabled : yes
loop : yes
inputs
1 : udp://@239.255.2.100:10001
output :
options
scene-format=png
scene-ratio=5
scene-width=80
scene-height=45
scene-prefix=testchannel
instances
instance
name : default
state : playing
position : 0.000000
time : 0
length : 0
rate : 1.000000
title : 0
chapter : 0
can-seek : 0
playlistindex : 1
schedule
> As said above, with old 1.1.3 vlc version, this works just fine and the thumbnail filename is "/tmp/testchannel.png".
If i use --scene-prefix=testchannel on the command line, when starting vlc 2.1.6 and above, the filename is correct.
Please help.
Thank you.