VLM output channel authentication

[prichr27]

Hello everyone. I am setting up a camera re-stream at a school for the first time using VLM conf. It is very easy to restream RTSP/RTP using a vlm conf file, but does anyone know if I can add a basic username/password to my output stream? I have been searching for over a week now for a solution and I would even pay at this point just so someone could help me solve this. Here is my current vlm.conf file it works very well.

Code: Select all

new channel1 broadcast enabled setup channel1 input rtsp://root:default@10.10.0.90:8554/axis-media/media.amp?videocodec=h264&camera=1 setup channel1 output #rtp{sdp=rtsp://:8554/camera1} new channel2 broadcast enabled setup channel2 input rtsp://root:default@10.10.0.90:8554/axis-media/media.amp?videocodec=h264&camera=2 setup channel2 output #rtp{sdp=rtsp://:8554/camera2} new channel3 broadcast enabled setup channel3 input rtsp://root:default@10.10.0.90:8554/axis-media/media.amp?videocodec=h264&camera=3 setup channel3 output #rtp{sdp=rtsp://:8554/camera3} new channel4 broadcast enabled setup channel4 input rtsp://root:default@10.10.0.90:8554/axis-media/media.amp?videocodec=h264&camera=4 setup channel4 output #rtp{sdp=rtsp://:8554/camera4} control channel1 play control channel2 play control channel3 play control channel4 play

If anyone can help me with this, I can help you with professional references and online work or just pay you.

[Jean-Baptiste Kempf]

VLC RTSP server does not support rtsp authentication.