Strong variation of the CPU load used by VLC

Discussion about configuration and usage of VLM (a stream scheduler) within VLC.
Zi3
New Cone
New Cone
Posts: 6
Joined: 24 Jul 2018 11:31

Strong variation of the CPU load used by VLC

Postby Zi3 » 03 Aug 2018 09:54

Hi everybody,

For now, i found the correct combinaison (version of VLC - type of interface - type of streaming - type of protocol) allowing me to stream several synchronised video flux without crashing.
The problem is, on my laptop :
- When i stream 23 video flux, the CPU load used for VLC is 70% 1 min after i started the BROADCAST streaming.
- When i stream 24 video flux, the CPU load is 99% 1 min after i started the BROADCAST streaming.
So what is the problem ? Is the problem coming from me ? Can i correct it by myself ?
It seems there is a kind of runaway of VLC.

Thanks in advance for you answer,
Cordially,
Zi3

Jean-Baptiste Kempf
Site Administrator
Site Administrator
Posts: 37523
Joined: 22 Jul 2005 15:29
VLC version: 4.0.0-git
Operating System: Linux, Windows, Mac
Location: Cone, France
Contact:

Re: Strong variation of the CPU load used by VLC

Postby Jean-Baptiste Kempf » 03 Aug 2018 15:12

Look at the logs to see if there is anything unusual
Jean-Baptiste Kempf
http://www.jbkempf.com/ - http://www.jbkempf.com/blog/category/Videolan
VLC media player developer, VideoLAN President and Sites administrator
If you want an answer to your question, just be specific and precise. Don't use Private Messages.

Zi3
New Cone
New Cone
Posts: 6
Joined: 24 Jul 2018 11:31

Re: Strong variation of the CPU load used by VLC

Postby Zi3 » 06 Aug 2018 16:59

Thanks for your answer.

If the number of video file is low (6) then the log file is empty.
If it'snt the case (20) then you will find below an exhaustive list of the errors contained in the log file :

- main error: no suitable interface module
- main error: interface "default" initialization failed
- filesystem error: cannot open file C:\Program Files\VideoLAN\VLC\telnet (No such file or directory)
- main error: Votre média d'entrée ne peut être ouvert
- main error: VLC ne peut pas ouvrir « file:///C:/Program%20Files/VideoLAN/VLC/telnet ». Vérifiez les messages pour plus de détails.
- stream_out_rtp: Consider passing --rtsp-host=IP on the command line instead.
- mp4 error: MP4 plugin discarded (no moov,foov,moof box)
- avcodec error: Could not open D:\NTRSCD\Site1\Ex1\9.mp4: Unknown error
- main error: ES_OUT_SET_(GROUP_)PCR is called too late (pts_delay increased to 300 ms)
- main error: ES_OUT_SET_(GROUP_)PCR is called too late (jitter of 5128 ms ignored)
- main error: Timestamp conversion failed for 27213001: no reference clock
- main error: Could not convert timestamps 0, 0 for h264

The most recurrent error is "- main error: ES_OUT_SET_(GROUP_)PCR is called too late (pts_delay increased to 300 ms)"

Do you know the meaning of this error ?

Jean-Baptiste Kempf
Site Administrator
Site Administrator
Posts: 37523
Joined: 22 Jul 2005 15:29
VLC version: 4.0.0-git
Operating System: Linux, Windows, Mac
Location: Cone, France
Contact:

Re: Strong variation of the CPU load used by VLC

Postby Jean-Baptiste Kempf » 22 Aug 2018 22:03

If it tries to open "telnet" then there is something wrong in your command-line.
Jean-Baptiste Kempf
http://www.jbkempf.com/ - http://www.jbkempf.com/blog/category/Videolan
VLC media player developer, VideoLAN President and Sites administrator
If you want an answer to your question, just be specific and precise. Don't use Private Messages.


Return to “VLM”

Who is online

Users browsing this forum: No registered users and 11 guests