The VideoLAN Forums

It is a wrong way for axis video flash streaming. To restream axis rtsp via Wowza with rtmp will be better solution.

Hi All The only way to playback/stream/transcode the Axis MKV files with VLC(Windows only) I've found: 1) download and install VH Multi camera studio(free) from the NET(google will help)... I test it with ver.1.1.8; 2) download and install AXIS Matroska File Splitter(free) from the Axis site(http://...

Hi, what is your AXIS camera type? If it is an "old" camera f/w version 4.xx then in order to access to multicast RTP you have to switch on "always multicast" mode in WEB interface of your camera(System opton - Advanced - Plane config - Network - Always multicast). Access to to m...

Hi, where you want to stream? If in LAN, than you have to install AMC on all of your LAN hosts and "move up"(to the top) Multicast RTP option in AMC Network settings section. After that you can playback multicast AXIS video with IE(ActiveX) and with WMP(Open url axrtpm://<ip>/axis-media/me...

Hi,

in vlc settings for streaming("Host Laptop") you have to point "Host Laptop" IP address with specific port and the same address&port - in vlc settings for playback on "Target Laptop".

Best regards

Hi,
1) Look for something like http or rtsp access in your cam's doc and then put it as an input stream for VLC;
2) VLC output: DIV3/WMV2, asf, mmsh

1) try check in "advanced options" in 0.9.8a and change cashing, but that version is bugfull yet;
2) downgrade to 0.8.6f and you can do that in GUI (It work).

Hi,
you have reduce Cashing parameter in streaming server(VLC) and in your media player.

Hi
It's not the vlc question. If you stream on LAN 192.168.0.104:8080 ,- you have to set your router for port forwarding(virtual server) like that: All TCP/UDP queries to WAN port 10000 forvard to LAN IP 192.168.0.104 LAN port 8080

VLC 0.8.6f Video Source 640x480 25 fr/s Local comp.: 1) input: -vvv dshow:// :dshow-vdev="Your Webcam Driver" 2) output: :sout=#transcode{vcodec=h264,vb=192,scale=0.5}:duplicate{dst=display,dst=std{access=http,mux=ts,dst=IPofYourLocalComp:PortForStreaming}} MediaServer: 1) input: -vvv http...

Hi,
"40k/s" - ??? Kilobit? KiloByte? What kind of webcam? Have you something like Device Driver for your webcam on your PC?
Answer depends of that information.

thanks for your assistance, however I, I believed leave it now and began from the front. again the requirements: from the camera (low speed internet, ~760kbit upload) to a linuxserver (with highspeed internetconnection). this server should share the videostream to use the stream on a website. on th...

Hi, I'm Krasimir from Bulgaria. I have two questions: 1. Is it possible to do multicast over the internet? [in general, and in my specific case, I'm on a city LAN, sharing IPs differing by just a digit (192.168.x.xx8 and 192.168.x.xx9 me/my office for instance)]. 2. Is it possible to do multicast f...

Hi...I am new to VLC player...I used VLC to stream video content in LAN and everything work flawless...Now, I am trying some advance move to stream video crossing internet (ex: from my friend's house to my apartment) but the problem is that both of our DSL are dynamic IP (my friend use yahoo dsl, a...

Why "End of support for VLC 0.8.6 series"?
But VLC 0.9.X for WIN32 can't transcode at all for the time present!

Is it possible to control output flv stream quality in VLC 0.9.x?

Use rtsp and http caching.
Examples:
:rtsp-cashing=5000 and more
:http-caching=5000 and more

Hi, is it an AXIS IP cam? If it is, then a way of partial problem solving exist. The AXIS IP video product output is MPEG4 ES unmuxed video stream, but VLC can't transcode such a strem by one way(don't ask me why). You have mux your video stream before transcoding. Example with VLC 0.9.2/4 1) AXIS v...

Hi,

You can use AXIS video encoders for MPEG4 encoding. Then you can mux the video and stream it with VLC 0.8.f without any problem. Are you from US? Then look for resellers here.

Hi,

I have the same problem with 0.9.x for WIN32
Advice: downgrade VLC to 0.8.6f

Good day! vlc 0.9.2/0.9.4 Grishenko win xp sp2 input: mpeg4/ts stream - constant bitrade 1024, video quality is OK transcoding & remuxing: vlc.exe -vvv http://192.168.2.247:8081:http-caching=3000 :sout=#transcode{vcodec="FLV1",acodec="mp3",ab="128",channels="2&...

Hi, I have also a wish in streaming with an Axis 207W. I don't speak Russian, have you got an english version of that information? regards, Frans Bosman Hi Frans, Before HowTo translation, I can describe it shortly: there are 2 problems 1) AXIS products stream video with MPE4 ES codec without muxin...

All Axis Communications AB network video products included new H264 cams and coders are working well (WIN XP). Playback - no problem, except H264 products(0.9.2/4 - only) Streaming with Transcoding (mpeg4 ES - DIV3/H264/FLV) - some undocumented manipulations needed: 2 way of transcoding(1-ts muxing,...

does anyone know the proper #transcode options to stream live video to windows media player on a windows mobile 6 device? I read somewhere that mms has been abondoned in favor of http. I can get the following to stream to the coreplayer application but can not get anything to stream using windows m...

I want to stream live video from a Axis 213 PTZ to more than 20 users. Is it possible to do this by using AXIS Video Capture Driver and windows media encoder to have the stream delivered by VLC server? Here you will find an answer for your question(HowTo) without AXIS Video Capture Driver. Let me k...