The VideoLAN Forums

Hi, Does any one know of a way to select a program from within a multiplexed transport stream using the Activex plug in?
I can display my feed ok, but can not see an easy way to select the channel with in it?

Is this somehting that is suported byt he plug in?

Hi Has any one got any experinace installing VLC under QNX?

This opperating system is new to me, and where I am resonable at controling VLC from the command line, I could really do with a QNX specific step by step guide to doing an istall.

Any help would be much appreciated.

Hi, did you ever get this working? - I am eager to lade VLC on QNX myslef

Appologies,

Didnt really know which topic best covered te issue, and had no luck in one, so tried the other.

does anyone have any sugestions as to why I can mux 9 copies of the same file perfectly from my hard drive, but not when recieving asi streams over a network ?

Hi All, I have been working on a vlm based multiplexer to mux 9 TS taken form udp sources. I have a test configuration which streams a recording of one of my 9 sources transparently to each of the 9 UDP ports as dummy inputs. When I do this my mux works fine, however when I test with the live source...

Hi All, I have been working on a vlm based multiplexer to mux 9 TS taken form udp sources. I have a test configuration which streams a recording of one of my 9 sources transparently to each of the 9 UDP ports as dummy inputs. When I do this my mux works fine, however when I test with the live source...

Excellent, will it be released on the full site or just through the forums ?

Hi does anyone have a build of VLC for Windows Mobile 6 ?

I am asking as I want to stream from my mobiles webcam to my network

Regards

Skinnersplace

Ok Fixed it now,

WMP10 mobile does not nativly decode divx, I had to encode with WMV and WMA.

Hi Labay, I am interested in streaming to WMP 10 on windows mobile 6. I have looked at your example and have been able to connect to a stream but it seams to contain no video or audio ? (the stream opens fine in WMP on my laptop when I connect to it as a mms stream) The commands I use are: Start /D ...

Hi Cable007, 0.8.6e on XP - have not been able to get it to work properly on vista yet !

Hi fpgamaster, sorry I dont know what you mean by demuxing muxing ?

I have tried 4 channels at this time, but will test if more then five if I get a chance and see if work's

This now works and can be found in the "VLM to MUX two channels" thread in the VLM section

Ok this is how to do it : new chan1 broadcast enabled loop setup chan1 input "File" setup chan1 output #transcode{vcodec=mp4v,vb=4096,scale=1,acodec=mpga,ab=192,channels=2}:std{access=udp,dst=127.0.0.1:8081} setup chan1 option sout-ts-es-id-pid setup chan1 option sout-ts-pid-audio=110 setu...

Ok, I have this working now, had to add {id-offset=0} to the Bridge in command.
Also the ts-es pid's and sdtdesc dont need to be set every time, as the channel names are set in the final channel, and the pid's are set in the bridge out commands.

Hi fpgaster,
I have got this working now, check out my VLM to mux two channels thread.

Hi I have been looking at this aswell, Can you post the rest of your config file as I was unable to get your sample to work. When I tested it, I found that the two video files were transmitted in a single program, but not muxed into a single transport stream (I was not able to selected them form the...

hello Hi Hi, I have been working on the problem for a while, and have taken two different aproaches : The first creates a two channel stream but only populates the first channel : new chan1 broadcast enabled loop setup chan1 input "C:\Docume~1\ASkinner\Desktop\BARS.ts" setup chan1 output #...

Hi Xsimo, So you actually get two channels muxed together and working properly ? all I get is a transport stream containg two channels (created using the sout-ts-program-pmt and mux=pmt lines) however only the fist channel is populated (with the first input into that channel) the second cahnnel is e...

Ok so I have tested a little further and it seams that my script only plays the first input to the final broadcast channel (whichever one that is) ?

ok, so I got my setup to stream (had to add access=udp to my ouput), But all I get is a single channel out. The navigation menue shows two channels (althought hte second one is identfied by the pid not the name in VLC). I have checked out the steeam in a ts monitor and can see that both chanels are ...

Hi Xsimio, I have tried your code, but although the html interfce say's its playing, I have not been able to open the output stream at all !? (I did change the destination to 127.0.0.1:8083 but that should not affect it ! also I used AVI files as the source.) Any ideas why I can not see the output (...

This is what I am working with at this time, new chan1 broadcast enabled loop setup chan1 input "C:\BARS.ts" setup chan1 output #transcode{vcodec=mp4v,vb=4096,scale=1,acodec=mp3,ab=512}:std{access=udp,mux=,dst=127.0.0.1:8081} setup chan1 option sout-ts-pid-audio=110 setup chan1 option sout...

Has anyone got anyfurther with this ? - I am having no luck, as I dont seam able to access the html interface on my vista machine.

HiHi,
Can you see any issues with the config I posted above ?
I have tried to confirm it on my vista machine, but it does not seam to load the same as it does on my xp machine (wich does not have the capacity to test it)

any help would be greatly appreciated

Skinnersplace