The VideoLAN Forums

I finally get it run!!!!! The problem was that i didn't emerge the v4l2 :oops: Now that it finally start running I get and error: [00000389] main audio output error: couldn't find a filter for the conversion [00000389] main audio output error: couldn't create audio output pipeline I saw that this pr...

I have no picture

Did you solved it?

new PCI-1 broadcast enabled setup PCI-1 input dvb:// setup PCI-1 output #standard{std{url=239.255.255.255:1234,name=Nederland-1},select="program=1101"} setup PCI-1 option dvb-frequency=618000000 setup PCI-1 option dvb-adapter=0 setup PCI-1 option dvb-bandwidth=8 setup PCI-1 option dvb-tra...

you could create a vlm config file and pass it as --vlm-conf param at startup Hi revolunet, Thanks for trying to help me. I've been trying to do it, with that command: cvlc --vlm-conf conf.vlm But I get that , didn't send any stream and stop at the "dummy interface: using the dummy interface m...

Hi, I want to know if it is possible to use VLM capabilities without having to use telnet or http, I want to stream from a server to my network. And I'm managing the network using ssh. What can I do? I use this command line cvlc -vvvv --programs=1101,1102 dvb:// :dvb-adapter=0 :dvb-frequency=6180000...

Hi zyx, I'm also working with DVB-t and I'm living in The Netherlands. That is the command line that I use to stream one channel: cvlc -vvvv --programs=1101 dvb:// :dvb-adapter=0 :dvb-frequency=618000000 :dvb-bandwidth=8 :dvb-transmission=8 :dvb-guard=4 :dvb-modulation=64 :dvb-cache=512 --ts-es-id-p...

The fault was that I was typing the full path to the tv card... And you only need to put a number. What I have before: vlc -vvvv dvb:// :dvb-adapter=/dev/dvb/adapter0 :dvb-device=/dev/dvb/adapter0/frontend0 :dvb-frequency=618000000 :dvb-bandwidth=8 :dvb-transmission=8 :dvb-guard=4 :dvb-modulation=64...

First DVB card: vlc -vvvv dvb:// :dvb-adapter=/dev/dvb/adapter0 :dvb-device=/dev/dvb/adapter0/frontend0 :dvb-frequency=618000000 :dvb-bandwidth=8 :dvb-transmission=8 :dvb-guard=4 :dvb-modulation=64 :dvb-cache=512 --ts-es-id-pid --program=1101 --sout "#standard{mux=ts,access=udp,dst=239.255.255....

I have a problem, because I have to pci cards (PCTV Hybrid Pro pci) and I wanna tune two different channels. I start streaming with one of them, and no problem. vlc -vvvv dvb-t:// :dvb-adapter=/dev/dvb/adapter0/frontend0 :dvb-frequency=618000000 :dvb-bandwidth=8 :dvb-transmission=8 :dvb-guard=4 :dvb...

Fixed!! The problem was the --sout-all, if I deleted it. It works vlc -vvv dvb-t:// :dvb-adapter=/dev/dvb/adapter0 :dvb-frequency=618000000 :dvb-bandwidth=8 :dvb-transmission=8 :dvb-guard=4 :dvb-modulation=64 :dvb-cache=512 --sout "#standard{access=udp{caching=0},dst=239.255.255.255:1234}"

Hi, I already install two DVB-T cards the PCTV Hybrid Pro I have the vlc 0.8.6 installed in a Gentoo machine. I'm trying to stream one channel. I've search the channels with the dvbscan and I pic up one of the channels: Nederland1:618000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_1_2:FEC_AUTO:QAM_64:TRAN...

SOLVED and working!!!

Thanks Hovis

Hovis, that help me a lot!! Because now it try to open the pvr with the pvr module!!!!!!

So thanks a lot

I still having a problem, I will see if i can advance by myself.

Thanks again Hovis

Ok, I compile the 2.6.24-r3 and right now the v4l and v4l2 compile correctly. The problem still being: *************************************************** *** glibc version with broken libintl detected. *** *** Messages localization will be disabled. *** *********************************************...

Well I have installed the kernel 2.6.23-r8, but I will try to update to the 2.6.24 , and try to emerge the VLC again with v4l2. I'll post the results.


Thanks for your suggestion hovis

Hello, I use VLC as a streaming server to stream the signal of my TV card (PVR 150) on my network. cvlc pvr:/dev/video0 --sout "#standard{mux=ts,access=udp,dst=192.178.1.12}" --security-policy=1 and I get this error *************************************************** *** glibc version with...

I'll post my progress: I don't know yet how to do a whole scan of the frequencies of Holland. Where I'm know. So I was trying to find some frequency: With "v4l2-ctl -f 223" you set the frequency to 223.000 Frequency set to 3568 (223.000000 MHz) Doing that you sintonize one channel. Whit th...

Hi I already have installed a server with gentoo and one PVR-150. What I'm trying right now is to sintonize one channel to start streamning.

I was trying to use dvbscan but it doesn't work, or maybe cause I don't know how to do it. Can any one help me please?


Thanks

Thanks
I only see that its compatibly with the vlc 0.9.0

Hello,
I'm wanna know if vlc works in Gentoo 64 bits?

I try to find something at the wiki or the forum and I didn't see anything.

Thanks

hi j-b, I have read the wiki and when I'm trying to do ./vlc --fake-file background.png --fake-aspect-ratio "4:3" fake: It said juanjo@juanjo-desktop:~/Desktop$ vlc --fake-foto.JPG --fake-aspect-ratio "4:3" fake: VLC media player 0.8.6c Janus vlc: unknown option or missing mandat...

Hi rv888,

How did you do the mosaic? What you want to do is like the PIP function at some tv?

Hello everyone, I want to create a dedicate server running Gentoo, with 4 Hauppauge pvr-500 http://www.hauppauge.com/pages/products/data_pvr500mce.html which means that I can have 8 tuners. The video server it will be VLC As a STB I have SBOX 6100 of Stino http://www.stino.com/sbox/6100/6100.htm . I...

It will be posible if you know the ip of the stream (I think soo)

To stream a video into the STB, it'll be no posible

I have a question about that...
When you do the mosaic you will not need the voice stream, right? So it will be "easier" because if you have to used it's problably get a desynchronization...
How can be this done in live strem?