No audio when playing .TS

[Caldur]

Why there is no sound when playing that .TS file on VLC?

http://forums.superiorpics.com/ubbthrea ... ghland_Zdf

[secathom]

Hi Caldur,


could this be related to your question?
viewtopic.php?f=14&t=83334.

regards,

secathom

[Caldur]

Thanks, I guess it could be the same reason. In Statistics pane it says
Decoded 1234 blocks
Played 1234 buffers
Lost 1234 buffers
So the whole audio is like being lost somewhere...
A friend told me that KMPlayer has no troubles to play it with audio at all so I couldn't be sure if it is a bug or just something wrong with the codecs on that video file.
Now this is interesting, I just found that at the very last second of the video the audio gets on. Just for a second.

[secathom]

Hi,

did u try with VLC 1.0.5 the O.P. from the link said it was working with this VLC version. I am somehow interested if its working for u with this version.
regards,

secathom

[Caldur]

Tried VLC 1.0.5, the behaviour is absolutely the same. No sound and everything I said applies to that version as well.
I think the stream is broken in such a way that VLC cannot handle it properly.

[secathom]

might be true, Iam sorry for u

[secathom]

Hi,

did i mention that u could do the following ? go to tools->messages->set verbosity to 2 before playing. Post the error message here.

regards,

secathom

[Caldur]

Ok, here is it, after running the video for just few seconds. That should be enough.

Code: Select all

main debug: processing request item Blackmore's Night - Highland (Zdf Fernsehgarten 19-09-2010-H264-720p-Luco).ts node Playlist skip 0 main debug: resyncing on Blackmore's Night - Highland (Zdf Fernsehgarten 19-09-2010-H264-720p-Luco).ts main debug: Blackmore's Night - Highland (Zdf Fernsehgarten 19-09-2010-H264-720p-Luco).ts is at 0 main debug: starting new item main debug: creating new input thread main debug: Creating an input for 'Blackmore's Night - Highland (Zdf Fernsehgarten 19-09-2010-H264-720p-Luco).ts' main debug: thread (input) created at priority 1 (../.././src/input/input.c:214) main debug: thread started main debug: using timeshift granularity of 50 MiB main debug: using timeshift path 'C:\Users\Caldur\AppData\Local\Temp' main debug: `file:///E:/Blackmore%27s%20Night%20-%20Highland%20%28Zdf%20Fernsehgarten%2019-09-2010-H264-720p-Luco%29.ts' gives access `file' demux `' path `E:\Blackmore's Night - Highland (Zdf Fernsehgarten 19-09-2010-H264-720p-Luco).ts' main debug: creating demux: access='file' demux='' path=':\Blackmore's Night - Highland (Zdf Fernsehgarten 19-09-2010-H264-720p-Luco).ts' main debug: looking for access_demux module: 2 candidates main debug: no access_demux module matching "file" could be loaded main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms) main debug: creating access 'file' path='E:\Blackmore's Night - Highland (Zdf Fernsehgarten 19-09-2010-H264-720p-Luco).ts' main debug: looking for access module: 2 candidates filesystem debug: opening file `E:\Blackmore's Night - Highland (Zdf Fernsehgarten 19-09-2010-H264-720p-Luco).ts' main debug: using access module "filesystem" main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms) main debug: Using AStream*Stream main debug: pre buffering main debug: received first data after 0 ms main debug: pre-buffering done 1024 bytes in 0s - 1000000 KiB/s main debug: looking for stream_filter module: 2 candidates main debug: no stream_filter module matching "any" could be loaded main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms) main debug: looking for stream_filter module: 1 candidate main debug: using stream_filter module "stream_filter_record" main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms) main debug: creating demux: access='file' demux='' path='E:\Blackmore's Night - Highland (Zdf Fernsehgarten 19-09-2010-H264-720p-Luco).ts' main debug: looking for demux module: 50 candidates ts debug: PATCallBack called ts debug: new PAT ts_id=16 version=1 current_next=1 ts debug: * number=11110 pid=6124 ts debug: PMTCallBack called ts debug: new PMT program number=11110 version=1 pid_pcr=6110 ts debug: * es pid=6110 type=27 dr->i_tag=0x52 ts debug: * es pid=6110 type=27 fcc=h264 main debug: selecting program id=11110 ts debug: * es pid=6122 type=6 dr->i_tag=0x6a ts debug: * es pid=6122 type=6 dr->i_tag=0x52 ts debug: * es pid=6122 type=6 dr->i_tag=0xa ts debug: * Stream Component Identifier: 2 ts debug: found language: deu ts debug: * es pid=6122 type=6 fcc=a52 filesystem warning: unimplemented query 4097 in control main debug: using demux module "ts" main debug: TIMER module_need() : 5.000 ms - Total 5.000 ms / 1 intvls (Avg 5.000 ms) main debug: looking for a subtitle file in E:\ main debug: looking for decoder module: 34 candidates avcodec debug: libavcodec already initialized avcodec debug: trying to use direct rendering avcodec debug: ffmpeg codec (H264 - MPEG-4 AVC (part 10)) started main debug: using decoder module "avcodec" main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms) main debug: looking for packetizer module: 21 candidates main debug: using packetizer module "packetizer_h264" main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms) main debug: thread (decoder) created at priority 0 (../.././src/input/decoder.c:301) main debug: thread started main debug: looking for decoder module: 34 candidates main debug: using decoder module "a52" main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms) main debug: thread (decoder) created at priority 2 (../.././src/input/decoder.c:301) main debug: thread started qt4 debug: IM: Setting an input ts debug: DEMUX_SET_GROUP 0 00000000 main debug: looking for meta reader module: 2 candidates lua debug: Trying Lua scripts in C:\Users\Caldur\AppData\Roaming\vlc\lua\meta\reader lua debug: Trying Lua scripts in C:\Program Files (x86)\VideoLAN\VLC\lua\meta\reader lua debug: Trying Lua playlist script C:\Program Files (x86)\VideoLAN\VLC\lua\meta\reader\filename.lua main debug: no meta reader module matching "any" could be loaded main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms) main debug: `file:///E:/Blackmore%27s%20Night%20-%20Highland%20%28Zdf%20Fernsehgarten%2019-09-2010-H264-720p-Luco%29.ts' successfully opened main debug: Buffering 0% main debug: Buffering 5% packetizer_h264 debug: found NAL_SPS (sps_id=0) packetizer_h264 debug: found NAL_PPS (pps_id=0 sps_id=0) main debug: Stream buffering done (328 ms in 0 ms) main debug: Decoder buffering done in 0 ms main debug: no usable vout present, spawning one main debug: looking for text renderer module: 2 candidates freetype debug: Building font databases. freetype debug: Took 95000 microseconds freetype debug: Using Arial as font from file C:/Windows/fonts/arial.ttf freetype debug: using fontsize: 2 main debug: using text renderer module "freetype" main debug: TIMER module_need() : 95.000 ms - Total 95.000 ms / 1 intvls (Avg 95.000 ms) main debug: looking for video filter2 module: 18 candidates swscale debug: 32x32 chroma: YUVA -> 16x16 chroma: YUVA with scaling using Bicubic (good quality) main debug: using video filter2 module "swscale" main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms) main debug: looking for video filter2 module: 18 candidates yuvp debug: YUVP to YUVA converter main debug: using video filter2 module "yuvp" main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms) main debug: window size: 1280x720 main debug: Deinterlacing available main debug: deinterlace 0, mode blend, is_needed 0 main debug: looking for video output module: 1 candidate vout_wrapper debug: Opening vout display wrapper main debug: looking for vout display module: 8 candidates direct3d debug: creating Vout EventThread direct3d debug: DirectXCreateWindow main debug: looking for vout window hwnd module: 3 candidates qt4 debug: requesting video... qt4 debug: Video was requested 0, 0 main debug: using vout window hwnd module "qt4" main debug: TIMER module_need() : 25.000 ms - Total 25.000 ms / 1 intvls (Avg 25.000 ms) direct3d debug: created video sub-window direct3d debug: Vout EventThread running direct3d debug: disabling screen saver main debug: VoutDisplayEvent 'resize' 1288x747 window direct3d warning: trying surface pixel format: YV12 direct3d debug: selected surface pixel format is YV12 direct3d debug: Direct3D scene created successfully direct3d debug: Direct3D device adapter successfully initialized main debug: using vout display module "direct3d" main debug: TIMER module_need() : 145.000 ms - Total 145.000 ms / 1 intvls (Avg 145.000 ms) main debug: using video output module "vout_wrapper" main debug: TIMER module_need() : 145.000 ms - Total 145.000 ms / 1 intvls (Avg 145.000 ms) main debug: got 1 direct buffer(s) main debug: pic render sz 1280x720, of (0,0), vsz 1280x720, 4cc I420, sar 1:1, msk r0x0 g0x0 b0x0 main debug: pic in sz 1280x720, of (0,0), vsz 1280x720, 4cc I420, sar 1:1, msk r0x0 g0x0 b0x0 main debug: pic out sz 1280x720, of (0,0), vsz 1280x720, 4cc I420, sar 1:1, msk r0x0 g0x0 b0x0 main debug: direct render, mapping render pictures 0-23 to system pictures 1-24 main debug: VoutDisplayEvent 'resize' 1280x720 window avcodec debug: using direct rendering main debug: End of video preroll main debug: Post-processing available main warning: vlc_object_find_name(postproc) is not safe! a52 debug: A/52 channels:6 samplerate:48000 bitrate:448000 main debug: reusing aout main debug: looking for audio output module: 4 candidates aout_directx debug: Opening DirectSound Audio Output aout_directx debug: found device: Primary Sound Driver aout_directx debug: found device: SPDIF Out (Creative SB X-Fi) aout_directx debug: found device: MOTU Analog 1-2 (MOTU Audio Wave for 64 bit) aout_directx debug: found device: MOTU Analog 7-8 (MOTU Audio Wave for 64 bit) aout_directx debug: found device: MOTU Analog 5-6 (MOTU Audio Wave for 64 bit) aout_directx debug: found device: MOTU Analog 3-4 (MOTU Audio Wave for 64 bit) aout_directx debug: found device: MOTU AES/EBU 1-2 (MOTU Audio Wave for 64 bit) aout_directx debug: found device: MOTU S/PDIF 1-2 (MOTU Audio Wave for 64 bit) aout_directx debug: found device: Speakers (Creative SB X-Fi) aout_directx debug: found device: MOTU Phones 1-2 (MOTU Audio Wave for 64 bit) aout_directx debug: device supports 5.1 channels aout_directx debug: device supports 4 channels aout_directx debug: device supports 2 channels aout_directx debug: device supports 1 channel aout_directx debug: Windows says your SpeakerConfig is stereo aout_directx debug: creating DirectSoundThread main debug: thread (DirectSound Notification Thread) created at priority 15 (../../.././modules/audio_output/directx.c:321) main debug: thread started main debug: using audio output module "aout_directx" aout_directx debug: DirectSoundThread ready main debug: TIMER module_need() : 20.000 ms - Total 20.000 ms / 1 intvls (Avg 20.000 ms) main debug: output 's16l' 48000 Hz Stereo frame=1 samples/4 bytes main debug: mixer 'f32l' 48000 Hz Stereo frame=1 samples/8 bytes main debug: filter(s) 'f32l'->'s16l' 48000 Hz->48000 Hz Stereo->Stereo main debug: looking for audio filter module: 14 candidates audio_format debug: f32l->s16l, bits per sample: 32->16 main debug: using audio filter module "audio_format" main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms) main debug: found a filter for the whole conversion main debug: looking for audio mixer module: 3 candidates main debug: using audio mixer module "float32_mixer" main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms) main debug: input 'a52 ' 48000 Hz 3F2R/LFE frame=1536 samples/1792 bytes main debug: filter(s) 'a52 '->'f32l' 48000 Hz->48000 Hz 3F2R/LFE->Stereo main debug: looking for audio filter module: 14 candidates main debug: using audio filter module "a52tofloat32" main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms) main debug: found a filter for the whole conversion main debug: filter(s) 'f32l'->'f32l' 52800 Hz->48000 Hz Stereo->Stereo main debug: looking for audio filter module: 14 candidates bandlimited_resampler debug: f32l/52800KHz/2->f32l/48000KHz/2 main debug: using audio filter module "bandlimited_resampler" main debug: TIMER module_need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms) main debug: found a filter for the whole conversion main debug: End of audio preroll main warning: PTS is out of range (370745), dropping buffer main warning: PTS is out of range (388745), dropping buffer main warning: PTS is out of range (356745), dropping buffer main warning: PTS is out of range (374745), dropping buffer main warning: PTS is out of range (342745), dropping buffer main warning: PTS is out of range (375745), dropping buffer main warning: PTS is out of range (343745), dropping buffer main warning: PTS is out of range (381745), dropping buffer main warning: PTS is out of range (349745), dropping buffer main warning: PTS is out of range (387745), dropping buffer main warning: PTS is out of range (355745), dropping buffer main warning: PTS is out of range (383745), dropping buffer main warning: PTS is out of range (351745), dropping buffer main warning: PTS is out of range (379745), dropping buffer main warning: PTS is out of range (347745), dropping buffer main warning: PTS is out of range (380745), dropping buffer main warning: PTS is out of range (348745), dropping buffer main warning: PTS is out of range (381745), dropping buffer main warning: PTS is out of range (349745), dropping buffer main warning: PTS is out of range (377745), dropping buffer main warning: PTS is out of range (345745), dropping buffer main warning: PTS is out of range (378745), dropping buffer main warning: PTS is out of range (346745), dropping buffer main warning: PTS is out of range (374745), dropping buffer main warning: PTS is out of range (342745), dropping buffer main warning: PTS is out of range (385745), dropping buffer main warning: PTS is out of range (353745), dropping buffer main warning: PTS is out of range (381745), dropping buffer main warning: PTS is out of range (349745), dropping buffer main warning: PTS is out of range (382745), dropping buffer main warning: PTS is out of range (350745), dropping buffer main warning: PTS is out of range (383745), dropping buffer main warning: PTS is out of range (351745), dropping buffer main warning: PTS is out of range (384745), dropping buffer main warning: PTS is out of range (352745), dropping buffer main warning: PTS is out of range (385745), dropping buffer main warning: PTS is out of range (353745), dropping buffer main warning: PTS is out of range (386745), dropping buffer main warning: PTS is out of range (354745), dropping buffer main warning: PTS is out of range (382745), dropping buffer main warning: PTS is out of range (350745), dropping buffer main warning: PTS is out of range (383745), dropping buffer main warning: PTS is out of range (351745), dropping buffer main debug: auto hidding mouse main warning: PTS is out of range (384745), dropping buffer main warning: PTS is out of range (352745), dropping buffer main warning: PTS is out of range (385745), dropping buffer main warning: PTS is out of range (353745), dropping buffer main warning: PTS is out of range (386745), dropping buffer main warning: PTS is out of range (354745), dropping buffer main warning: PTS is out of range (387745), dropping buffer main warning: PTS is out of range (355745), dropping buffer main debug: incoming request - stopping current input main debug: dying input main debug: control type=0 main debug: control: stopping input main debug: dying input main warning: can't get output picture avcodec warning: disabling direct rendering main debug: thread times: real 0m2.840004s, kernel 0m0.000000s, user 0m1.045206s avcodec debug: ffmpeg codec (H264 - MPEG-4 AVC (part 10)) stopped main debug: removing module "avcodec" main debug: killing decoder fourcc `h264', 13 PES in FIFO main debug: [0] 4 0 main debug: [1] 2 0 main debug: [2] 2 0 main debug: [3] 2 0 main debug: [4] 4 0 main debug: [5] 2 0 main debug: [6] 2 0 main debug: [7] 4 0 main debug: [8] 4 0 main debug: [9] 4 0 main debug: [10] 2 0 main debug: [11] 2 0 main debug: [12] 2 0 main debug: [13] 2 0 main debug: [14] 2 0 main debug: [15] 2 0 main debug: [16] 4 0 main debug: [17] 2 0 main debug: [18] 2 0 main debug: [19] 2 0 main debug: [20] 2 0 main debug: [21] 2 0 main debug: [22] 4 0 main debug: [23] 2 0 main debug: saving a free vout main debug: removing module "packetizer_h264" main debug: thread times: real 0m2.840004s, kernel 0m0.000000s, user 0m0.000000s main debug: removing module "a52" main debug: killing decoder fourcc `a52 ', 0 PES in FIFO main debug: removing module "a52tofloat32" main debug: removing module "bandlimited_resampler" aout_directx debug: closing audio device aout_directx debug: DirectSoundThread exiting main debug: thread ended main debug: thread times: real 0m1.625002s, kernel 0m0.000000s, user 0m0.000000s main debug: removing module "aout_directx" main debug: removing module "audio_format" main debug: removing module "float32_mixer" main debug: releasing aout ts debug: pid list: ts debug: - pid[0] seen ts debug: - pid[6110] seen main debug: Program doesn't contain anymore ES ts debug: - pid[6122] seen ts debug: - pid[6124] seen ts debug: - pid[8191] seen main debug: removing module "ts" main debug: removing module "stream_filter_record" main debug: removing module "filesystem" main debug: thread ended main debug: dead input main debug: thread times: real 0m2.845004s, kernel 0m0.062400s, user 0m0.140400s main debug: destroying useless vout direct3d debug: Direct3D scene released successfully direct3d debug: DirectXEventThread terminating direct3d debug: DirectXCloseWindow direct3d debug: WinProc WM_DESTROY qt4 debug: releasing video... qt4 debug: IM: Deleting the input main debug: TIMER input launching for 'Blackmore's Night - Highland (Zdf Fernsehgarten 19-09-2010-H264-720p-Luco).ts' : 5.000 ms - Total 5.000 ms / 1 intvls (Avg 5.000 ms) qt4 debug: Video is not needed anymore main debug: removing module "qt4" main debug: removing module "direct3d" main debug: removing module "vout_wrapper" main debug: removing module "freetype" main debug: removing module "yuvp" main debug: removing module "swscale"

[secathom]

Hi,

as far as i can see is your problem : the amin warning pts is out of range. PTS = Presentation time stamp.http://de.wikipedia.org/wiki/PTS. i think u have to change the language at least to englisch in this url. But I am really not sure about this. Just a guess on my side