I have installed VLC 0.8.6 with the intention of being able to watch the TV Channel selected from the DreamBox 7020 on my PC.
The problem that I am experiencing is that:
1. before the VLC starts to display a blank video takes between 1 to 2 minutes;
2. once the blank screen is displayed takes an other minute before first image is displayed and then the images are updated every 30 to 40 seconds;
3. the sound does not really exists
If I look at the statistics of the streamining, I can see that the data are received at a constant rate and once the first image is displayed, I can see that the displayed images under the Video Statistics is reporting at least a 25 frames/sec; so, I have the impression that the transfer and the video decoding is OK but the actual frames are not displayed on the screen.
The network connection that I am using is a direct between the DreamBox and the PC without any router in the middle or switch. Clearly, the link is OK since I can ping the DreamBox, I can access its web based interface and I can receive the streaming as described above.
I would like to know what else I may miss in the configuration; any suggestion and help is very welcome.
Thanks a regards,
superarex
P.S.: the same problem is also with VLC 0.8.5